2023 California all weather climates balcony architectural super larger aluminum windows


Request A Quote

Homeowner   Builder   Trade Professional

Project Type
New Construction   Remodeling   Replacement

# of windows?

# of doors?

Located in the center of the city it was originally a textile factory. As built in the early twentieth century, its exterior and original windows and doors have fallen into a shabby state over the years.

The new owner has taken over the site of the factory and wants to turn it into an industrial-style office building. So, the exterior walls were only simply maintained, not repainted to maintain a sense of age while allowing the new windows to blend in with the overall atmosphere while highlighting the design aesthetics.
Therefore at that time, our design idea was to provide a larger light area while maintaining the overall aesthetics and maintaining good ventilation without taking up too much interior area by opening windows.

However, we encountered a problem with the window type. The factory's reconstruction standards require that the window type and opening method should be consistent with the appearance before the renovation. The old windows were single-hung windows, and although the client felt that the functionality of the old windows was outdated, there was no other way out. At this time, our designer came up with a proposal that we could change the window opening method to tilt and turn while maintaining the same appearance. Finally, we adopted upper fixed windows, and lower tilt and turn windows, all with simulated-divided-lite with warm spacers. From the visual side, our products completely simulated the original single-hung windows in the factory.

The tilt and turn window can both tilt inwards at the top or open inwards like common casement windows. This is the most typical kind of window in Germany, its native land. It is likewise widespread in many other European nations. In Europe, it is typical for these to be of the "turn first" kind. i.e., when the handle is counted on 90 levels the window opens up in the side-hung mode. With the handle transformed to 180 levels, the window opens in the bottom open mode.

Anyway, tilt and turn windows provide functional features like ventilation and opening ways and perfectly match the whole building’s aesthetic taste. After the discussion with the customer, we added more detailed decorations like simulated-divided-lite grilles, with TGI warm spacer. Make the whole window not only better performance but also prettier.

Feel Free To Get A Free Quote, Click The Pic Below

01 / Glazing Configuration

Double-glazing windows with US standards and NFRC certifications. Depending on the orientation of the windows and doors in the house, different SHGC values’ glazing is used. High SHGC glazed is used with caution on the sun’s facing windows to help with overheating in summer. In the beginning, our client thinks triple-glazing is the best choice since it has the best chances of keeping cold out; however, it may not be best for a mixed climate, where summers are hot, and it’s more expensive. High-quality double-glazed windows will keep you warmer in the winter while cutting on energy costs; it’s also best for hot summer climates.

So finally, we decided to go with double glazing. Our energy-efficient integrated glazing units (IGU) feature double-pane glass, warm-edge spacers, argon gas fill, Low-E coatings, and fully tempered glass, they can not only create a comfortable and natural indoor environment but also save electricity bills and heating bills around 300~700USD per year according to your whole building’s fenestration areas. That’s a real bargain compared to choosing a regular glazing set.

02 / Free Design Assistance

With our own expertise, we provided the no-cost design development and contract documentation with CAD & BIM drawings, including elevation, details about the project, and installation help.

Before production, we will provide accurate sample drawings, which will clearly show the cross-sectional pattern, size, opening method and direction, pattern of the warm spacer, and the installation nodes. We will not go into production until you have signed off on the drawing to ensure that you receive a final product that meets the exact requirements of your project.

03 / Delivery & Warranty

We export tens of millions of dollars of windows and doors to the U.S. every year, and we know that improper packaging can cause breakage of the product when it arrives on site, and the biggest loss from this is, I'm afraid, the cost of time, after all, workers on site have requirements of working time and it needs to wait for a new shipment to arrive in case of damage occurs to the goods.
So, we pack each window individually and in four layers, and finally into (non-fumigated) wooden boxes, and at the same time, there will be a lot of shockproof measures in the container, to protect your products. We are very experienced in how to pack and protect our products to ensure they arrive at the sites in good condition after long-distance transportation. What the client concerned, we concern most.
Each layer of the outer packaging will be labeled to guide you on how to install, it to avoid delaying the progress due to incorrect installation.

In our opinion, good quality means never having to compromise. The high-quality aluminum and components that we use allow us without compromising structural strength. In other words, even with slim frames, we offer a high-performing product for you. Our research and development team made sure that you still get unrivaled thermal insulation, high performance, and top-quality hardware on the 10 YEARS WARRANTY. The TPS glazing ensures that no air leakage and fogging issues on products for 25 YEARS WARRANTY.

Contact us anytime if you have an interest in our products, click the pic below

DOORWIN AL+ 70 Energy Efficient Tilt Turn Windows


TURN OPENING· Maximum Air Exchange
TILT OPENING · Allows Micro Ventilation, Saves More Space


Ultra-High Precision & High Strength

Meet North America Standard

The Thickness (For Window) ≥1.6mm
The Main Load-carrying Parts ≥2.0mm



LOW-E Technology Can Helps Homes Stay
Cooler In The Summer And Warmer In The Winter.


Technoform Bautec’s TGI-Spacer M – Our warm-edge spacer technology minimizes thermal bridging and has one of the lowest failure rates in the industry.


Ergonomic Design

Excellent Anti-Theft Performance RC2

Germany Roto / Siegenia Optional


Our High-precision Polyamide Is From Technoform Bautec- PA66 Nylon.
Our Thermally-broken Aluminum Profile Systems Utilize The Latest Polyamide And Low-Emissivity Foil Technologies To Minimize Thermal Bridging At The Frame And Sash.


Quality Of American Military Industry

304 S.S Protection Screen


No Scratches / Flaking / Fading

Satisfy All Your Imagination About Color

Fluorocarbon Coat Finishing Is Available At Request For Extreme Environmental Conditions.





Provide Clear Instructions
Save Installation Time


Who is Responsible
for the Customs Clearance?

Arrival of Goods

Submit Customs Clearance Documents to Customs

Tax (Paid By Us or By the Client)

Pick Up the Goods

What Should We Do If We Do If We Buy Goods, But We Don’t Know A Forwarder?

We,doorwin, Have Our Own Shipping Agent And Forwarder,who Could Take Good Care Of The Shipping, Custome Clearance, Documents, And Delivery To The Warehosue Or Job Site.

What Is The Delivery Time?

For Regular Purchase Orders, The Productions Time Will Be 3~5 Weeks From The Date Of Getting The Approved Shop Drawings. Shipping Time Will Take Another 4~5 Weeks From Our China To Local Seaport Or Warehouse.

What Is Your Payment Items?

Generally,50% Deposit Payment By Bank Wire Transfer Or Credit Card, Balance
Payment Before Shipping Is Accepted.