About Our Project
Nestled within a rural context, located in Horseshoe Bay, Texas, this magnificent residence distinguishes itself for the care and refinement of details down to the smallest feature.
There are functional tilt & turn windows and lift & slide doors, opening majestically towards yards and sharing spaces, freeing up the internal and external environments, creating a unique area mixed up with contemporary and historic features.
This project was created with Doorwin 70S tilt & turn windows and 160S lift & slide doors with ALU+ thermal break aluminum systems in the shade of black, highlighting the importance of lighting and accessibility, bringing the right values to it through the presence of large glass.
In this regard, the GBG (grilles between the glass) décor, bring some historic and solemn sentiment to this modern house.
An impressive entrance conveys, since the first impact, the importance and value of the residence we are about to go through: the access door, a large paneled lift & slide, it’s instrumental here and takes on a key role. Doors and windows are thus connected with the rest of the house matching its brick and wooden parts, for a perfect harmony of colors and atmospheres.
01 / German Imported Hardware System
For windows and doors, hardware is as important as the engine is to the car. The continuous technological innovation of the European hardware industry has strongly promoted the performance improvement and functional innovation of windows and doors. Doorwin uses Siegenia™ multi-point locks, hinges, and Hoppe™ handles from Germany.
Multi-point lock systems provide not only the burglar-resistance but also a tighter compression seam, make the window keeps the good energy efficient performance. Together with Technoform Bautec’s insulation edge bond and sealant strips, these make up our products' top insulation and energy-saving performance.
02 / Grilles-between-the-glass
Divided lite windows and doors offer unique architectural solutions for buildings without compromising energy efficiency or aesthetics. Doorwin provides multiple muntin and glass options to customize your divided lite windows and doors. Further customization is available with a variety of colors and materials, creating an infinite number of design combinations to best suit your style.
In this project, our GBG divided lites are finished in black tones to resemble aluminum windows with a modern attitude. Square-shaped divided lite profiles support this industrial chic look, adding visual framing and delineating large open spaces. These grilles add that special touch to match windows or doors to any architectural style, turning a large open pane into a dramatic statement.
Besides, we offer a full assortment of clear glass, Low-E glass, and grilles between glass. Various colors, profiles, and widths of grilles will match any architectural detail in your home.
03 / Save Your Money On Installation Costs
We have several international patents to reduce clients’ labor costs, such as our unique flanges and assembly type tubular design, which is different from the other products on the market. What sets us apart among Chinese counterpart is that all our products are equipped with nail fin structures for quick and easy installation. Labor costs during installation may exceed of the window and door price, therefore, our exclusive patent allows users to not only get a significant increase in installation efficiency, but also greatly reduce the labor cost of window and door installation. A cost that may bring you unexpected savings that far exceed the price difference you may care about now.
04 / Glazing
With US standards and NFRC certifications, our energy-efficient integrated glazing units (IGU) feature double-pane glass, warm-edge spacers, argon gas fill, Low-E coatings, and fully tempered glass, they can not only create a comfortable and natural indoor environment but also save electricity bills and heating bills around 300~500USD per year according to your whole building’s fenestration areas. That’s a real bargain compared to choosing a regular glazing set.
05 / Profiles
For this project, we used high-quality thermal break aluminum profiles. Finest extruded aluminum profiles with a thickness of 1.4 mm to provide excellent durability and strength. With a polyamide bar (Polyamide 66, or Nylon 66) PA66 applied in the middle of aluminum profiles to break or insulate the heat and cold, The polyamide we use is from the world-famous brand Technoform Bautec™ (www.technoform.com). Thermal breaks have decreased aluminum frame U-factors (heat loss rate) from roughly 2.0 to about 1.0 Btu/hr-sq. ft-°F. In hot climates. Our thermal break aluminum is more than 1.4 mm in thickness, Doorwin’s exclusive thermal break aluminum profiles perform much better than standard aluminum in both insulation and strength.
Doorwin offers over 250 RAL color options for the aluminum surface, including smooth finishing and matte finishing.
06 / Free Design Assistance
With our own expertise, we provided the no-cost design development and contract documentation with CAD & BIM drawings, including elevation, details about the project, and installation help.
Before production, we will provide accurate sample drawings, which will clearly show the cross-sectional pattern, size, opening method and direction, pattern of the warm spacer, and the installation nodes. We will not go into production until you have signed off on the drawing to ensure that you receive a final product that meets the exact requirements of your project.
About Doorwin Packing & Shipping System
Doorwin's professional packing system guarantees all products are delivered safely and without any damage. We apply a four-point packing system. Firstly, adhesive plastic film is applied on interior wood frames and exterior aluminum frames to avoid scratches on the surface. Then, a paper board is applied after we apply air bubble film surrounding the whole windows/ doors to avoid any destruction or clash. Lastly, we place them into a durable non-fumigation plywood crate to avoid any possible damage during transportation.
With years of experience shipping our products worldwide, we could guarantee to ship our products to their final destinations intact and without any damage.
About Doorwin Factories
Doorwin is one of the most professional window & door manufacturers are known for its great customized products. In Doorwin, a variety of colors, styles, and sizes of products are available to meet the client’s unique requirements. We own three ISO9000-certified modern factories in China. With a factory area of 20,000 m2 and a production capacity of 100,000 m2 per year. Doorwin Group has the scale to ensure timely delivery and the flexibility to reduce manufacturing lead times to as short as 18 days.
Contact us anytime if you have an interest in our products, click the pic below
Not only did we have a great time at the show, but in the next two months, our experts will be traveling throughout the United States to do site visits and full technical guidance service for our customers. If you were not able to attend the show but are still interested in our products, feel free to contact us and our experts will still be able to provide on-site services. There are more offers waiting for you, so come and contact us!